My car on the dyno to get the FRS stock power output!
People love to modify their FRS’s with engine upgrades and the like. But how to you know the benefits of your upgrades if you do not know the FRS stock power output? The first thing I did before installing any upgrades on my FRS, was to get the car on the dyno to see how much power it made. This way, I can tell exactly what kind of benefits my future upgrades will provide. In addition, this gives you a “bang for you buck” analysis as well. Is it really worth spending $1000 on an exhaust system? Or, does the $500 exhaust system provide the same benefit?
Racecomp Tarmac 2 coilovers are here for my Scion FRS.
A core part of any high performance car is the suspension. Today I am un-boxing my new Racecomp Tarmac 2 coilovers that I received from Myles at RCE. These coilovers are double adjustable, which means there are two adjustments for damping. In addition to a rebound adjustment, they include an adjustment for compression. I also have another set of springs to use as another tuning option to the standard 400lb springs. These additional springs are from Swift, a well known name, in the 450lb spring rate. To begin, I will be using the Swift Springs in the stiffer spring rate to see how things go. However, if those turn out to be too hard, I might quickly switch to the softer 400lb springs. You can be I will be installing these bad boys very soon!
It’s the winter season here in Colorado, so what better thing to do than start buying some FRS mods when you cannot drive 🙂 In this video I go over various parts I have accumulated recently. Some of the engine bolt-ons include my RevWorks UEL header, Perrin cold air intake, Perrin intake tube, Perrin lightweight pulley, and Berk cat pipe. In addition, I also picked up an OpenFlash tablet, some Hawk brake pads, Whiteline bushing inserts, and more! I will be installing certain parts here in the near future. It should not be too long before the FRS is race ready and I can get it out to drive.
The Enkei RPF1 wheel is a pretty common performance wheel for many cars. Its popularity has grown because of its extremely lightweight at a reasonable cost. They also looks great and there are many cool colors to choose from. I picked up a set of RPF1 wheels myself just this past week. I chose the somewhat rare gunmetal color for my RPF1’s. Because the RPF1 is very lightweight, I should be able to run much larger tires while not being heavier than the stock setup. Since the FRS is a relatively low power car, maintaining low weight on the rotating parts is critical.
Whenever I buy a used car, or even a new car, I always want to make sure it is looking top notch. Most cars have scratch and swirl marks all over the paint. This is usually from improper care of the car paint and/or improper washing techniques. However, there are very few clear-coat paints that are immune to this and paint polishing is the remedy. Since I used to do professional detailing, I have all of the necessary tools and products to get the job done. I started the FRS detailing session by polishing the entire car with my Rupes Bigfoot random orbital polisher. The polish I used was Sonax Profiline perfect finish. In addition, once the car was all polished up, I coated the paint with 22ple Signature Glass Coating. The results are amazing and the Hot Lava orange color really stands out now!
Racing a stock FRS in the C-Street autocross class.
In my quest to figure out what autocross class to run my new 2013 Scion FRS in, I hit up a friend of mine who has a well setup C-Street prepped FRS of his own for a co-drive. While the car is mostly a stock FRS, it does have a Tanabe exhaust and Koni shocks. In addition to that, the car also TRD springs and a front sway-bar. Check out how things went as I jump back into a CS classed car. The last time I have driven a car with this level of preparation was my Mazda Miata’s and the RX-8!
I have been wanting to buy one of these cars (either an FRS or BRZ) for a couple of years now. I finally gave in and bought a 2013 Scion FRS in the Hot Lava color! The car is a couple of years old but in fantastic condition. With just under 11k miles on it, it will make a great autocross race car project. The FRS is a 6 speed manual and sports the 200 horsepower boxer engine. Being that the car is extremely lightweight and agile, it should be a blast to drive.